Electric guitar recording techniques
A guitar is a type of musical instrument with ancient roots that is used in a wide variety of styles musical. Usually has six strings, but four, seven, eight, ten or twelve string guitars also exist. An electric guitar is the kind of guitar tablets used to convert the vibration of its steel strings with soul in the electric current which is then amplified.
There are several ways to record a guitar electric. The traditional method is to connect to a very good amplifier. The last option is to connect the guitar directly into the computer and use software plug-in to handle the amp and speaker modeling.
When recording an electric guitar, the amp is the important factor regarding the MIC is concerned, and So your position is important. The dynamic mic produces a solid sound with a smooth high end. However, his position as just having a lot in tone as the microphone itself.
One way to capture the sound of a big pile is the creation of the stack in a large room, play hard and put the microphone to various feet so that the combination of all speakers can be recorded. Using this method, the microphone captures the guitar sound as much as the public would.
One of the microphones can be inverted, however, does not produce the best results. Here using a capacitor microphone as the distance often produces a sense of space, but the bottom line is that everything that sounds good goes with the guitar.
The biggest problem that many amateur guitarists face tone is poor. To to solve this problem the recorder should check the amp and guitar combination on microphone level and then must decide where to place. Tone should be adapted but one thing should be considered. The low end will increase if the microphone is placed near the source. This is called proximity effect.
The microphone that is used for recording the electric guitar is preferably a dynamic microphone because of its ability to support large volumes. These are technical things that are be taken into account. But there are some simple points to help you through the recording.
As a first and very basic rule, one must ensure that the guitar is in very good condition, ie the strings are properly fitted. Tuning must be checked before each shot, as it prefers the current study heat.
Equipment containing transformers will tend to cause hum interference on electric guitar especially the single coil pickups. Monitors computer, in particular, cause serious interference problems with pills of guitar, so it is advisable to keep them as far as possible.
While using different electric guitar types or sounds for recording, two or more overdrive guitar parts should be maintained to keep the different sounds in the mix. For example, using a single coil setting for one part and a humbucker for another.
About the Author
Victor Epand is an expert consultant for music gear, speakers, and microphones. You can find the best marketplace for music gear, speakers, and microphones at these 3 sites: music gear, amplifier, speakers , and microphones,dynamic microphone.
On-camera Shotgun Mic audio vs Digital Voice Recorder
[phpzon]Mic Recorder, 35, Electronics[/phpzon]
